Out-of-Stock

Gigasitron 2.0-inch TFT LCD Display Module, 240×320, ST7789V, SPI Interface

$22.00

No tax

Gigasitron 2.0-inch TFT LCD Display Module, 240×320, ST7789V, SPI Interface

A compact 2.0-inch full-color TFT LCD module with 240×320 resolution, ST7789V driver IC, and 4-wire SPI interface. Designed for embedded systems, Arduino, STM32, ESP32, Raspberry Pi Pico, robotics projects, handheld devices, test instruments, and custom GUI applications. The module uses a white LED backlight and supports a clear QVGA display area in a compact PCB form factor. The LCD panel specification lists 240(RGB)×320 resolution, ST7789V driver, white LED backlight, and 4-wire SPI interface.

Buy XC-IPS-2A on Shopee

Quantity

Out-of-Stock

Security policy

Secure checkout and customer information protection.

Delivery policy

Orders are currently fulfilled through our Shopee store.

Return policy

Please contact us if you need support for your order.

Product Description

The Gigasitron 2.0-inch TFT LCD Display Module is a compact color display solution for embedded electronics and user-interface projects. With a 240×320 QVGA resolution, it provides enough screen area for menus, icons, sensor data, graphics, status screens, and small GUI applications.

This module is based on the widely used ST7789V TFT LCD controller, making it suitable for many microcontroller platforms such as STM32, ESP32, Arduino, RP2040 / Raspberry Pi Pico, and other SPI-capable MCUs. The display uses a 4-wire SPI interface, reducing the number of required control pins while keeping the connection simple for embedded development.

The LCD panel uses a white LED backlight and has a listed glass display area of 30.6 mm × 40.8 mm, with the LCD module size specified as 35.8 mm × 51.2 mm × 2.0 mm. The optical specification lists a typical center brightness of 200 cd/m², typical contrast ratio of 200, and response-time values of 15–20 ms rising and 20–30 ms falling, making it suitable for general embedded display use.

Based on the PCB images, your breakout board also provides practical through-hole header access for SPI and control signals, plus onboard labeling for easier wiring. The back side includes the Gigasitron branding and a microSD card socket area, which makes the module more useful for image, bitmap, font, or data-storage based display applications.

Key Features

2.0-inch TFT LCD display module
240 × 320 pixel QVGA resolution
ST7789V display driver
4-wire SPI interface
White LED backlight
Compact red PCB breakout design
Clearly labeled pins for easier wiring
Suitable for Arduino, STM32, ESP32, RP2040 / Pico, and other MCUs
Good for embedded GUI, robotics, sensor displays, handheld devices, and product prototypes

Technical Specifications

Item	Specification
Display size	2.0-inch TFT
Resolution	240(RGB) × 320 pixels
Driver IC	ST7789V
Interface	4-wire SPI
Backlight	White LED
LCD module size	35.8 × 51.2 × 2.0 mm
Glass display area	30.6 × 40.8 mm
Typical brightness	200 cd/m²
Typical contrast ratio	200
System voltage	2.6–3.5 V, typical 2.8 / 3.3 V
Typical LCD operating current	5 mA
Backlight forward voltage	Typical 3.2 V at 60 mA

The electrical specification lists system voltage from 2.6 V to 3.5 V, typical 2.8 / 3.3 V, and typical operating current of 5 mA; the backlight is specified at typical 3.2 V with 60 mA forward current.

Pin Description for Listing

The LCD FPC interface includes ground, backlight cathode/anode, VCC, SPI command/data selection, chip select, serial clock, serial data input, reset, and ground pins. The specification lists /RESET, CS, SPI_A0, SPI_SCL, and SPI_SDA as the main control/SPI signals.